The required kernel module is not included in the base system. However you will find the needed modules as source-code, which you can compile and install manually. The required modules are: mlx4 and mlxen. #tested with ‘FreeBSD 11.0-Release-p7’ #download the … Continued
system: 2x NICs with 10 Gb/s SFP+ ports connected with fibre-cable (Intel 82599, Mellanox MNPA19-XTR) test-software: iperf3-3.1.3 result: +5% #with mtu=1500 [SUM] 0.00-10.00 sec 11.0 GBytes 9.45 Gbits/sec sender [SUM] 0.00-10.00 sec 11.0 GBytes 9.40 Gbits/sec receiver #with mtu=9000 … Continued
Disclaimer: All liability is excluded. Be careful, you can brick your card. Important: you can’t use the firmware from HP 516937-B21 for the 671798-001, because all downloadable firmwares are for the 2-Port Version or for the wrong Board-Revision. So … Continued